Short trains with a twist


PBV - Composite - All Third. Click image for larger size.

Above: A few more examples here of prototype-inspired short trains for Farthing. These are all a bit unorthodox, as opposed to the more standard formations shown in an earlier entry.
The above formation, for instance, illustrates that not all short trains were pulled by tank locos! This train was inspired by a photo on the Warwickshire Railways website, which shows a 2-4-0 3226 class pulling a 4-wheel PBV to dia V5 (or V11?), a 6-wheel compo to dia U16 and a 6-wheel All Third to dia S3 (many thanks to RMwebber "Penrhos 1920" for help with the coach identification). My interpretation also has the V5 and U16, while the S3 has been replaced with an S9. A 3232 class is standing in for the 3226. I have just finished restoring and repainting the U16, which was originally built by Colin Edge.




"Toad", Composite, Brake Third. Click image for larger size.

Above: This formation was inspired by photos on page 69-70 of "GW branchlines: A pictorial survey" by C.W. Judge, which include a 517 class loco hauling a "Toad" goods brakevan and two 4-wheelers (Composite and Brake Third) on the Presteign branch in 1906. It seems to have been a regular sight on that line for several years. Some photos also show the train without the "Toad", giving an even shorter train. Other similar examples are mentioned in this thread (thanks gents!). The Toad seen here is from an old K's kit for the AA3 type. I'm not sure if the metal end and cab sheathing are appropriate for the 1900s, or if they were added later?



Autotrailer and PBV. Click image for larger size.

Above: I've always found GWR autotrains a bit boring, but the trailers were sometimes used in interesting combinations. This little train was inspired by a photo on page 31 of "The Lambourn Branch" by Kevin Roberts and Roger Simmonds, which shows an 850 class loco hauling an Autotrailer and a 4-wheel PBV to diagram V2 in the 1900s. Both of the model coaches seen here are second-hand: The trailer is a scratchbuilt oddity picked up some years ago (featuring real glass windows!), depicting one of the gangwayed diagram D types that worked behind railmotors in the Plymouth area. The V2 is another Colin Edge scratch-build, which I have restored and repainted. Although these trains are not exactly mainstream, they all feature that ungodly mix of stock that was quite typical of the GWR around the turn of the century. Good fun to replicate in model form! Note: The GWR would have called a Passenger Brake a "Van". I use the former term here as it seems more intuitive.

Comments